







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Enterprise?
Walk-in shower installation in Enterprise, NV typically costs $4,500 to $12,000, with most homeowners landing around $7,200 for a curbless tile shower with a frameless glass panel on a standard 60-inch alcove. A straight tub-to-shower swap at the low end runs closer to $4,500, while a fully custom curbless wet-room with a linear drain and bench topping out at $12,000 is common in the larger master baths around Southern Highlands and Rhodes Ranch.
That range covers demolition, waterproofing, tile, glass, and fixtures. What moves the number is almost always the waterproofing method, the glass, and whether the drain has to be relocated. We put the exact figure in writing before a single tile comes off the wall, so the number on your invoice is the number you approved.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the $4,500 to $12,000 range splits by line item. These are the numbers we quote in Enterprise, not national averages pulled from a website.
| Line Item | Typical Cost Range | What’s Included |
|---|---|---|
| Demolition & disposal | $300 – $900 | Tear-out of existing tub or shower, haul-away, protection of surrounding floors |
| Plumbing rough-in & drain relocation | $400 – $1,800 | Moving the drain to center or linear position, new valve, curb drain conversion |
| Waterproofing (Schluter, Wedi, or hot-mop) | $600 – $1,600 | Pan, membrane, banding, flood test before tile goes down |
| Tile & setting materials | $900 – $3,200 | Porcelain, ceramic, or natural stone; thinset, grout, Schluter edge trim |
| Glass enclosure (frameless or semi) | $900 – $3,000 | Custom-tempered panel, hinges, handle, install |
| Fixtures (showerhead, valve, handle) | $400 – $1,200 | Kohler, Moen, or Grohe trim; pressure-balance or thermostatic valve |
| Bench, niche, or curbless conversion | $500 – $2,000 | Framing, waterproofed seat, recessed niche, zero-threshold slope work |
| Labor & project management | $1,200 – $2,400 | Daily site management, photo updates, final walkthrough |
Add those up and the low end lands near $4,500 for a simple swap with a semi-frameless door. The high end pushes past $11,000 when you’re relocating the drain, cutting a curb down to zero threshold, and selecting a large-format slab or marble-look porcelain. We break every line out on the written estimate so you can see exactly which upgrades are worth it and which are just nice-to-have.
What Affects Walk-In Shower Installation Pricing in Enterprise
Enterprise sits on the southwest side of the valley, and several local factors push the price more than homeowners expect.
- Water hardness and scale. Southern Nevada Water Authority water runs hard, which means the showerhead, valve, and glass will see mineral buildup within a couple of years. We recommend specifying a pressure-balance valve with a replaceable cartridge and treating the glass with a hydrophobic coating. That adds roughly $150 to $400 up front but saves a full glass swap later.
- Concrete slab construction. Most Enterprise homes sit on post-tension slabs. Relocating a drain means cutting the slab – carefully, around the tension cables – which adds $600 to $1,400 versus working in a home with a raised foundation. This is why we photograph and mark cable runs before any concrete saw goes down.
- Waterproofing method. A hot-mop pan is cheap up front but rarely the best choice for a curbless installation. A bonded membrane system like Schluter Kerdi or Wedi costs $400 to $900 more but gives you a lifetime waterproof envelope. In a town where summer temps hit 115°F and shower walls see daily steam, that membrane is doing real work.
- Tile size and layout. Large-format 24×48 porcelain needs more substrate prep and a flatter wall than 4×4 ceramic. A herringbone or chevron pattern adds 20 to 35 percent to the tile labor line. A simple offset grid runs the lowest labor.
- Glass config. A frameless panel with one fixed sheet and a pivot door is the mid-tier choice. A full three-sided frameless enclosure with a mitered corner runs $2,400 to $3,000 by itself. Semi-frameless with a header bar saves $800 to $1,200.
- Structural changes. Moving a wall, widening the alcove, or converting a tub-and-shower combo into a full walk-in room pushes the project up the range. That work overlaps with a full bathroom remodel in Enterprise, and the written price for both should reflect the combined scope, not two separate markups.
One local pattern worth knowing: in the 89052 and 89148 zips, we routinely see showers built in the early 2000s where the original hot-mop pan has cracked under the tile. You won’t see a leak until the subfloor softens or the ceiling below stains. If your home is 20-plus years old and the shower has never been opened up, budget for the pan replacement whether or not you see a problem. We didn’t invent that pattern; we just see it too often to ignore.

How to Save on Walk-In Shower Installation
You don’t have to spend $12,000 to get a shower that looks and performs like one. A few choices meaningfully move the number without cutting corners on what matters.
- Keep the existing drain location. Not relocating the drain saves $400 to $1,800 and avoids cutting the post-tension slab. Center drains are fine.
- Choose porcelain over natural stone. A quality large-format porcelain (there are excellent stone-look options from major tile makers) runs $4 to $9 per square foot versus $18 to $40 for marble. Installed properly, no one can tell the difference from two feet away.
- Go semi-frameless on the glass. A semi-frameless door with a header bar performs exactly like a frameless unit for daily use and saves $800 to $1,200. Save the frameless splurge for the master bath where the visual payout is biggest.
- Bundle with other bathroom work. If you’re already replacing the vanity, toilet, or flooring, adding the shower to the same scope cuts mobilization costs. Bundling with a bathroom vanity installation in Enterprise is common and efficient.
- Skip the bench if you don’t need it. A built-in bench is worth every dollar for aging-in-place or for anyone who shaves their legs in the shower. If you don’t need one, a corner niche for shampoo costs a fraction and delivers most of the convenience.
Free estimates are standard on every project. Call (844) 797-5994 and we’ll walk your shower, measure it, and hand you a written price range the same day. No pressure and no “we’ll get back to you.”
Is a Walk-In Shower Cheaper Than a Tub-and-Shower Combo?
A walk-in shower runs $4,500 to $12,000, which is typically $1,000 to $3,000 more than keeping a tub-shower combo at the same finish level. The walk-in is the pricier build because a full waterproof pan replaces the tub’s factory waterproof surface, and the glass enclosure adds real cost.
The trade-off is long-term: walk-in showers are lower-maintenance, easier to clean, and better for aging-in-place. They also tend to command a higher resale return in the Enterprise market, where buyers in the 28-to-45 range actively prefer a walk-in over a tub in the master bath. If you’re converting, the tub-to-shower conversion in Enterprise path is the most cost-efficient route because the drain is already in the right spot. Call (844) 797-5994 for a written price on both options before you decide.
Can I Install a Walk-In Shower Over My Existing Tile?
No – not properly. A walk-in shower installed over existing tile without removing the old waterproofing layer is a re-tile, not a shower build, and it fails. The typical failure window is 18 to 36 months before moisture finds the framing.
We open the wall every time for a reason. The pan, membrane, and drain assembly all need to be tied into a continuous waterproof envelope. There’s no shortcut that keeps that envelope intact. If a contractor offers to “save you money” by going over the tile, that’s $2,000 to $4,000 of future demo and repair. Ask for the waterproofing method in writing. Call (844) 797-5994 for an honest assessment of what your shower actually needs.
How Long Does Walk-In Shower Installation Take in Enterprise?
A standard walk-in shower takes 7 to 12 working days from demo to final inspection. Add 3 to 5 days if you’re relocating the drain or converting to curbless, and add 5 to 7 days if you’re doing a full bath remodel alongside it.
The timeline looks like this: demo and framing, two days; plumbing rough-in and inspection, one to two days; waterproofing and flood test, two days; tile install, two to four days; grout, cure, and trim, one day; glass template and install, two to three days because the glass is templated after tile but fabricated off-site. Homes in Enterprise are commonly built on slabs with tight driveways, so scheduling the glass truck and the tile crew to avoid stacking trades is half the battle. You’ll know your arrival window each day – live arrival time tracking is part of how we run every job. Call (844) 797-5994 to schedule a project walkthrough.
Walk-In Shower vs. Curbless Shower: What’s the Price Difference?
A curbless (zero-threshold) shower costs $1,200 to $2,800 more than a standard curbed walk-in. The premium comes from sloped floor framing, a buried linear drain, extended waterproofing, and the labor to get the tile plane right on a slab.
For homeowners planning to age in place, the curbless upgrade pays for itself by eliminating the tripping risk of a curb. For a guest bath that sees occasional use, a low-profile 2-inch curb is fine and saves the money. We install both regularly in Enterprise; the choice is really about who uses the shower and how long you plan to stay in the home.
What Does a Walk-In Shower Cost if the Subfloor Is Damaged?
Subfloor repair adds $600 to $2,500 to a walk-in shower installation. Concrete slab repair (spall patching) typically runs $600 to $1,200. Replacing rotted wood subfloor framing in a second-story bath runs $1,200 to $2,500 depending on the extent.
You won’t know until the old pan comes out. This is where upfront pricing gets tested. Our written estimate includes a line for contingency that we discuss with you before demo. If we find damage, you get photos, a written scope for the repair, and an approved price before we touch it. No surprise invoice. Call (844) 797-5994 if you suspect previous water damage under your shower.
Why Get Walk-In Shower Installation Through Sawyer Remodel Enterprise?
We’re not a contractor who quotes low and disappears after the deposit. Sawyer Remodel Enterprise is a general contractor serving the southwest valley, backed by named material partners and a written guarantee on every job.
- The Relay Visibility Guarantee on every project – written price before work starts, live arrival time, and before-and-after photo updates. Every job. No exceptions.
- 365-Day Done Right Promise – if anything about the installation isn’t right within a full year of project close, we make it right. Backed in writing.
- Background-checked, uniformed technicians – you know exactly who is walking into your home before they arrive.
- Calls answered by a live person 24/7 – no voicemail, no callback queues.
- Name-brand materials with manufacturer backing – Kohler and Toto fixtures, Cambria and Caesarstone surfaces, plus full material partnerships across the remodel.
- Experienced technicians – our technicians have up to 21 years of experience in bath and shower builds.
We work in Enterprise because we know the housing stock – the post-tension slabs, the hard water, the neighborhoods from Enterprise and Southern Highlands to the master-planned builds out toward Rhodes Ranch and Mountain’s Edge. That local knowledge is what keeps your shower from being a “we’ll figure it out” project. Learn more on our home page.
How Much Does It Cost to Maintain a Walk-In Shower in Enterprise?
Maintenance on a walk-in shower in Enterprise runs about $50 to $150 per year in supplies, plus a $200 to $400 resealing or re-caulking job every two to three years. The cost is dominated by hard water scaling, not by the shower itself.
Hard water is the single biggest reason showers look older than they are in Southern Nevada. A squeeze of a good squeegee daily, a monthly descaler, and a hydrophobic glass coating will stretch the glass life well past its 10-year mark. A cartridge replacement every four to six years ($80 to $180 in parts and labor) keeps the pressure-balance valve working properly. Call (844) 797-5994 if you want a maintenance plan quoted alongside your install.
FAQs – Walk-In Shower Installation Cost
How much does a walk-in shower cost in Enterprise in 2026?
Walk-in shower installation in Enterprise runs $4,500 to $12,000, with most homeowners spending around $7,200. That covers demo, plumbing, waterproofing, tile, glass, and fixtures on a standard 60-inch alcove. Call (844) 797-5994 for a free written quote.
Is it cheaper to repair my shower or install a walk-in?
Repair is almost always cheaper in the short term. A shower pan reseat or tile replacement runs $400 to $1,800. If your shower is 15-plus years old and showing two or more failure signs (loose tiles, soft spots, cracked pan, recurring leaks), replacement is the better long-term number because you’re likely facing $2,000 to $4,000 in repair costs spread across a few years. Call (844) 797-5994 and we’ll tell you honestly which path makes sense for your shower.
Does walk-in shower installation increase home value in Enterprise?
A walk-in shower typically returns 60 to 70 percent of its cost at resale and helps the home sell faster. In Enterprise, the buyers most active in the 28-to-45 range consistently prefer a walk-in shower over a tub in the master bath. So it’s not just a value-add on paper – it’s a competitive advantage in the listing.
Can you install a walk-in shower without fully remodeling the bathroom?
Yes – a shower replacement in Enterprise runs as a contained project without touching the vanity, toilet, or floor outside the shower footprint. A shower replacement in Enterprise is the most common scope we handle. Call (844) 797-5994 to scope it exactly.
What’s included in the $4,500 to $12,000 walk-in shower installation price?
That range includes demo and disposal, plumbing rough-in, waterproofing, tile installation, glass enclosure, showerhead and valve trim, and final cleanup. Custom upgrades like a bench, niche, or curbless conversion are priced as separate line items. No hidden fees and no “mystery” charges at invoice time.
Do you offer financing for walk-in shower installation in Enterprise?
We discuss payment options on every estimate – ask when we’re on the walkthrough. What’s guaranteed is a written price before work starts and a digital invoice at completion you can pay from a link. Call (844) 797-5994 for details on payment plans and current availability.
Related Pages
- Bathroom remodel in Enterprise
- Small bathroom remodel in Enterprise
- Tub-to-shower conversion in Enterprise
- Shower replacement in Enterprise
- Bathroom vanity installation in Enterprise
- Other neighborhoods we serve
- Shower replacement in Henderson, NV
- Our Las Vegas remodeling service
- North Las Vegas service area
- Spring Valley service area
- Summerlin service area
- Remodeling blog and project guides
Ready to Know Exactly What Your Walk-In Shower Will Cost?
You shouldn’t have to call five contractors to find out if a walk-in shower is in your budget. Call (844) 797-5994 for a free estimate and we’ll hand you a written price range the same day – the line items, the upgrades worth paying for, and the ones you can skip. Live person answering, no voicemail, at any hour.
Pricing reflects the Enterprise market as of 2026. Sawyer Remodel Enterprise offers free estimates – call (844) 797-5994.
What Our Customers Say
"Floors and paint finished on time. Floors were sanded, stained, and the walls painted without any gaps in the schedule."
- Ron T."Home renovation with a new layout. Permits and inspections were all tracked online."
- Nolan R."Quote was itemized and every change was approved in the app."
- Sasha L.












