A Sawyer company - serving Enterprise, NV
A remodeled primary bathroom with a soaking tub and a walk-in shower

Vanities, Tile & Fixtures in Enterprise, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Enterprise
A remodeled hall bathroom with patterned floor tile and painted walls
A low-threshold walk-in shower with a bench and grab bar
A powder room with botanical wallpaper and a stone sink
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A whole-home remodel with the living, dining and kitchen areas opened up
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Vanities, Tile & Fixtures in Enterprise, NV

Vanities, tile and fixtures are the three parts of a bathroom you actually touch, look at and clean every week – and they’re what your remodel is judged by long after the dust clears. Replacing a dated vanity, retiling a shower floor that’s started to flex or replacing a builder-grade faucet all fall squarely in this lane, and they’re the upgrades Enterprise homeowners call us about most. Call (844) 797-5994 and we’ll put a written price in your hands before anything moves, as part of a full Bathroom Remodeling plan or as a focused refresh on its own.

We’re a general contractor working as part of the Relay Home Co. family of independent local businesses, and every job here runs under The Relay Visibility Guarantee: a written price before work starts, a live arrival time on the day, and photo updates before and after. Nobody waits on a four-hour window wondering if anyone’s coming.

A tile setter installing wall tile in a shower

Key Takeaways

  • Tile that sounds hollow or moves underfoot usually means failed waterproofing, not bad grout – fix the layer under it, not the surface.
  • Enterprise’s hard water leaves mineral film on faucets and shower glass fast; the finish you choose matters more here than in softer-water towns.
  • You’ll have a written price before any work starts, and the number on the invoice is the number you approved.
  • Our technicians have up to 21 years of experience on tile, setting and fixture work.
  • Every project carries the 365-Day Done Right Promise: if it’s not done right, we make it right, backed in writing.

When You Need Vanities, Tile & Fixtures

  • Your grout and caulk are failing around the shower. In Enterprise, the hard water and the big swing between our hot summers and cool desert nights work on grout and caulk joints year in and year out. When caulk pulls away at the tub edge or grout starts cracking in a line, water is already getting behind it.
  • The tile feels loose or sounds hollow. Press your thumb into a floor tile and feel it give, or tap it and hear a hollow ring: that’s usually a failed thinset bed or the waterproofing under it. Retiling the surface alone won’t hold – the layer beneath has to come out.
  • Your vanity is the wrong size or shows water damage. A cabinet with swelling at the base, soft particleboard behind the sink, or a vanity that swallows the whole bathroom. We measure for a footprint that actually lets the door swing and the drawers pull.
  • Fixtures are dripping, sticking or past their finish. A faucet that drips, a shower valve that creaks or a finish that’s gone chalky from our water. Kohler, Moen and Grohe fixtures are what we set most, and they’re what we stand behind.
  • You want a cosmetic refresh before selling or renting. New vanity top, faucets and a tile backsplash can change a whole bathroom without touching plumbing or layout – good for a fast, tidy upgrade.
  • The shower floor is pooling or the drain sits high. Slope and drain height are set at the tile stage. If water ponds or the drain is proud of the floor, it’s a tile-and-waterproofing job, not a quick fix.
A wide opening with a new beam where the kitchen wall was removed

Our Vanities, Tile & Fixtures Process

  1. Measure and walk-through. We measure the footprint for the vanity, check the existing plumbing and shutoffs, and look at what’s under your current tile so the quote reflects reality, not a guess.
  2. Written price before tools move. You get a line-by-line written price before any work starts – materials, labor and fixtures laid out so you can see where the money goes. Free estimate, no surprises at the invoice.
  3. Selection with name-brand materials. Vanities, tops and tile from proven makers – we work with partners like Kohler, Cambria and KraftMaid (plus others), so you’re choosing from brands with real manufacturer backing rather than mystery suppliers. We’ll bring samples and talk honestly about what wears best in Enterprise.
  4. Demo and prep. Old tile, old vanity and failed backing come out, and we check the subfloor and wall for rot or movement before anything new goes down.
  5. Waterproofing and tile setting. We build the waterproof layer – often a bonded membrane with proper slope to the drain – then set tile with a Schluter edge trim (the metal strip that finishes and protects where tile meets a wall or floor edge). Grout and caulk go in after the tile cures.
  6. Set the vanity and fixtures, then photo-verify. Cabinet, top, sink, faucet and trim go in, we test everything under pressure, and you get before-and-after photos plus the 365-Day Done Right Promise in writing.

Vanities, Tile & Fixtures Pricing in Enterprise

We’d rather you know the ballpark before you call than call just to find out. Here’s what this work typically runs in the Enterprise market; exact numbers depend on size, material and what’s behind the wall.

Item Typical range
Vanity replacement (cabinet + top + sink, standard size) $700 – $2,800
Tile floor install (bathroom floor, standard tile) $1,200 – $3,000
Shower wall tile + waterproofing $2,000 – $5,500
Faucet / fixture replacement (per fixture) $150 – $450
Tile backsplash (vanity or shower accent) $400 – $1,200

What moves the price: the tile you pick (porcelain and ceramic run less than large-format slab or natural stone), whether the subfloor or wall needs repair, and how much waterproofing is required behind a shower. A cosmetic vanity-and-fixture swap sits far below the cost of a full tear-out. We keep commitments to writing here rather than hoping the invoice lands close – free estimate, and a written price before any work starts. Call (844) 797-5994 for yours.

Repair or Replace? A Quick Read on Vanities and Fixtures

If a faucet drips or a handle sticks, repair almost always wins – a rebuild kit or new cartridge keeps a good fixture going for years. If the cabinet base is swollen or the box is pulling away from the wall, replacement is usually the better spend. Tile is the one place to be honest: if a single tile is cracked, we can replace it. If tiles are lifting in a run or the floor sounds hollow across the field, the failure is underneath and a patch won’t last.

Should You Go With a Standard Vanity or a Custom One?

For most bathrooms in standard-size baths, a stock or semi-custom vanity from a maker like KraftMaid is the practical choice – you get a real warranty and it fits common footprints. A custom build earns its cost in tight or odd-shaped bathrooms, or when you want a precise storage layout. We’ll tell you which one your room actually calls for instead of upselling the custom.

Why Tile and Waterproofing Matter in Enterprise

Tile failures in Enterprise more often trace back to what’s under the tile than to the tile itself. Our hard water leaves scale on glass and fixtures, and the dry heat plus the cool swing between day and night keep working on caulk lines and fresh grout. That’s why we build the waterproof membrane and slope first and set tile on top of a sound surface. Skip that and you’re back to loose tiles in two or three years.

Why Homeowners Choose Sawyer Remodel Enterprise for This Work

  • Written price before any work starts – always included, not an upgrade.
  • 365-Day Done Right Promise – if it’s not done right, we make it right, backed in writing.
  • Free second visit if a repair fails – covered, no argument.
  • Background-checked, uniformed technicians – you know who’s coming before they arrive.
  • Live phone answering 24/7 – a real person, not a voicemail loop.
  • Our technicians have up to 21 years of experience with tile, setting and fixtures.

When you’re ready to plan the whole room around these pieces, see our home services overview or step up to the full Bathroom Remodeling in Enterprise page.

FAQs – Vanities, Tile & Fixtures

How much does it cost to retile a bathroom in Enterprise?

Retiling a bathroom floor in Enterprise typically runs $1,200 – $3,000, and shower wall tile with proper waterproofing runs $2,000 – $5,500 depending on size and material. Large-format and stone tile push toward the top of that range; the waterproofing behind the tile is a real cost, not a line to cut. Call us at (844) 797-5994 for a written estimate – estimates are free.

Can you replace a vanity without gutting the whole bathroom?

Yes – a vanity replacement is often done on its own without touching the rest of the room. We shut off the water, remove the old cabinet, check the wall and supply lines, and set the new one; a standard-size vanity swap usually runs $700 – $2,800. Call (844) 797-5994 and we’ll confirm what your room needs before quoting.

Why is my bathroom tile coming loose?

Loose or hollow tile usually means the waterproofing or thinset bed under it has failed, not that the tile itself was bad. Water gets behind and the bond lets go – patching just the surface rarely holds, so we fix the layer underneath. Call us to take a look and get a written price before any work starts.

What fixtures do you recommend for Enterprise’s hard water?

For Enterprise’s hard water, choose fixtures with a durable finish and avoid the cheapest chrome that scales easily – Kohler, Moen and Grohe are what we set most often, and their finishes hold up better against mineral buildup. A quick wipe-down after showers extends any finish’s life. Call (844) 797-5994 to talk through options for your bathroom.

Written by the team at Sawyer Remodel Enterprise, serving Enterprise.

Getting started with Sawyer in Enterprise

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Enterprise team

A local vetted partner works across Enterprise and the towns around it, to the same written standard as every Sawyer job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Enterprise? Licensed & insured · free written estimates
Call (844) 797-5994
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Sawyer Remodel Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch