







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Toto Construction
Sawyer Remodel Enterprise provides independent Toto construction and repair service in Enterprise, NV, for owners of Washlet-integrated toilets, Ultramax II and Drake two-piece models, and Neorest smart toilets. What makes our Toto work different is the diagnosis: we check the supply, the filter, and the control board before we quote anything, so you get a real answer instead of a new-toilet sales pitch. Every job carries a written price before work starts and The Relay Visibility Guarantee – live arrival time, photo updates, and a number you approved. We are an independent Toto service provider and are not affiliated with, sponsored by, or authorized by Toto. Call (844) 797-5994 for a free estimate.

Why Trust Sawyer Remodel Enterprise for Your Toto Construction?

Our technicians have up to 21 years of experience, and a good share of that has been spent on Toto fixtures specifically – the ones with electronics inside a wet room, which is a harder service problem than a standard gravity toilet. A Washlet is a plumbing fixture and an appliance at the same time. The tech who shows up has to be comfortable with both.
We service Toto warranty-safe. That means we don’t crack open a sealed control module on a unit that’s still under manufacturer coverage, and we don’t swap in a universal fill valve on a Tornado Flush toilet where the refill rate was engineered for the bowl. We source OEM-compatible parts (the parts built to Toto’s spec for that model) whenever they’re available. Where OEM is discontinued or priced past what the unit is worth, we say so and lay out the aftermarket option, with the trade-offs in plain language.
Background-checked, uniformed technicians arrive on every Enterprise job, and you’ll know who’s coming and when before they pull up. If something we installed or repaired fails inside the first year, the 365-Day Done Right Promise covers it in writing – we come back and make it right. That’s not a courtesy; it’s on the paperwork from day one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Enterprise
Enterprise water is hard, and that single fact drives most of the Toto failures we see here. Here are the ones that come up again and again.
- Washlet control board and sensor failure. On G400, S500e, and C200 units, a board that’s been hit by a power surge or by years of bathroom humidity will drop the bidet functions entirely or throw a repeating error code. The unit flushes fine but the seat won’t spray – that’s the tell. A multimeter test on the board and the wand motor separates a dead board from a seized motor before anyone orders a part.
- Wand motor and nozzle seizing from mineral scale. In Enterprise, hard-water calcium builds on the wand assembly and the nozzle, and the motor that extends it starts straining until it stops. You’ll see a weak spray, a nozzle that won’t fully extend, or a grinding sound. Descaling or replacing the wand assembly usually restores full function – replacing a $1,500 toilet over a $200 wand is the wrong call.
- Fill valve and flapper wear on older Drake and Ultramax II toilets. The phantom flush (the toilet runs for a few seconds on its own, hours after use) is almost always a flapper that no longer seals. On a Tornado Flush Ultramax II, a worn fill valve also weakens the flush itself because the refill rate drops. These are wear parts – a service call, not a replacement.
- Neorest lid hinge and seat sensor malfunction. The auto-open/close on a Neorest depends on a hinge mechanism and a presence sensor. When either degrades, the lid stops responding, opens and closes at random, or refuses to close at all. Hinge assemblies are model-specific, so the serial number matters when we source the part.
- Rough-in and electrical mismatch on new installs. The most avoidable problem we see: a Toto smart toilet set on a floor flange that doesn’t match its rough-in, or a Washlet plugged into an existing GFCI outlet that’s shared with a hair dryer. Getting the rough-in dimension and a dedicated outlet right at install time is cheaper than fixing either later.
Toto Parts & Our Repair-vs-Replace Approach

For Washlets and smart toilets, we source OEM control boards and motors when they’re available, because a generic board can drop features the unit was bought for. We don’t claim to stock Toto parts locally – parts are ordered per job, matched to the model and, where it matters, the serial number. That’s the honest way to do it: no “we have it on the truck” promises that fall apart at the door.
The repair-vs-replace call comes down to age and the cost of the failed component. On a five-year-old G400 with a dead control board, an OEM board is almost always the right money. On a twelve-year-old unit where the board, the wand motor, and the lid hinge are all going, we’ll tell you plainly that the repair cost is climbing toward a replacement, and we’ll price both so you can decide. No pressure either way.
If your Washlet is flashing and not spraying, call (844) 797-5994. Estimates are free, and the written price comes before any work starts.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start at the water supply and the inlet filter, then move to the electronics – multimeter on the board and wand motor, error-code read on the Washlet panel. On a Neorest, we test the lid hinge and seat sensor. We tell you what failed and why.
- 2
Repair or install. You get a written price before any tool comes out. Approved? We do the work with OEM or OEM-compatible parts sourced to your model. For a new install, we set the rough-in, add a dedicated GFCI outlet if the layout needs one, and fit the supply line to spec.
- 3
Test. Full-cycle test: flush, spray pressure, temperature settings, auto-open/close, and the error code cleared. You see it work before we leave.
- 4
Warranty. Written guarantee on the work, and the 365-Day Done Right Promise if anything we touched fails inside the year. Photo documentation before and after, delivered to your phone.
Toto Products We Service & Install in Enterprise
We work on the full Toto residential line. That covers the Washlet-integrated combos (G400, S500e, C200) and standalone Washlet seats; the Ultramax II high-efficiency two-piece with Tornado Flush; the Drake two-piece, including SoftClose seat models; and the Neorest luxury integrated smart toilet. We also handle the plumbing side that surrounds them – supply lines, rough-in adjustments, and dedicated outlets during a remodel – plus the vanity and tile work that goes with the bathroom. If you’re mid-remodel and want the Toto fitted right the first time, that’s the ideal moment to bring us in.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Sawyer Remodel Enterprise is multi-brand, not a one-fixture shop. Alongside Toto, we work with KraftMaid cabinetry, Kohler fixtures, and Cambria and Silestone surfaces – name-brand materials with manufacturer backing behind the install. If your bathroom remodel or vanity installation mixes a Toto toilet, a Kohler sink, and a Cambria top, one crew handles the whole job and one written price covers it.
A typical Toto service call, start to finish: A Washlet suddenly stops spraying or shows a flashing error light; the usual cause is a failed control board or a seized wand motor from mineral buildup. A qualified pro first checks the water supply and filter, then tests the motor and board with a multimeter. If the board is bad, they replace it with an OEM unit and clear the error code; if the motor is seized, they descale or replace the wand assembly. In many cases that repair restores full function without replacing the entire toilet.
Cost of Toto Construction & Bathroom Service in Enterprise

Here’s the range Enterprise homeowners can expect, whether it’s a Toto repair inside a finished bathroom or a remodel that puts a new Toto at the center of it. The written price lands before work starts.
| Service | Price range in Enterprise |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
For a targeted repair – a Washlet board, a wand assembly, a fill valve – we diagnose first and quote the specific part and labor in writing, because the range on a repair is narrow once we know what failed. Call (844) 797-5994 for a free estimate.
FAQs – Toto Construction Service in Enterprise
No. We’re an independent Toto service provider, not affiliated with, sponsored by, or authorized by Toto. We’ve simply worked on the line long enough to install and repair it correctly, with OEM and OEM-compatible parts and warranty-safe practices.
Yes, whenever OEM parts are available for your model. We source them per job, matched to the model and serial number. Where OEM is discontinued or disproportionately expensive on an out-of-warranty unit, we lay out quality aftermarket options with the trade-offs so you can choose.
Most single-issue repairs – a fill valve, a control board, a wand assembly – are handled in a single visit once the right part is in hand, and parts are ordered ahead of the appointment. Larger work like a bathroom remodel that includes a Toto install runs to the project schedule. You get a written timeline up front. Call (844) 797-5994 to book.
We cover the Washlet-integrated combos (G400, S500e, C200) and standalone Washlet seats, the Ultramax II with Tornado Flush, the Drake two-piece line, and the Neorest smart toilet, plus the plumbing, electrical, and vanity work around them.
Not if it’s done right. We work warranty-safe – we don’t breach sealed modules on in-warranty units or install off-spec parts that could give a manufacturer grounds to deny a claim. If your unit is still under coverage, tell us at booking and we’ll factor that into the approach.
In most cases it can be fixed. A flashing code with no spray usually points to a failed control board or a seized wand motor from mineral buildup, and replacing the specific part restores full function – replacing the whole toilet is rarely necessary. Call (844) 797-5994 for a diagnosis and exact quote; estimates are free.
Yes, a dedicated GFCI outlet is the right setup, and yes, it can be added during a remodel. Wiring it in while the walls are open is far cheaper than retrofitting after tile goes back down. We handle the outlet and the rough-in as part of the bathroom scope.
The Drake comes in standard rough-in options, and fit depends on measuring your existing flange before ordering – not guessing. We check the rough-in and supply position on site; most Enterprise homes fit a standard model, and where they don’t, the correct variant is ordered up front.
Often yes. The Neorest needs clearance for the lid to swing and room for the electrical connection; a small layout can usually be made to work with the right model and outlet placement. We measure the space before recommending a model rather than after.
Shorter than in soft-water regions. The hard water across Enterprise speeds up scale on the flapper seat and fill valve, so phantom flushing and weak flushes show up sooner. Those are wear parts – a service call replaces them and the toilet is back to a full flush.
A bathroom remodel runs $9,000 – $28,000, a small bathroom remodel $5,000 – $12,000, and a vanity installation $800 – $3,000; targeted Toto repairs are quoted in writing after diagnosis. Call (844) 797-5994 for an exact quote – estimates are free.
Book Your Toto Service in Enterprise, NV
If your Washlet is flashing, your Drake is phantom-flushing, or you’re planning a bathroom remodel around a new Toto, call Sawyer Remodel Enterprise at (844) 797-5994. You’ll get a written price before work starts, a live arrival time, and photo updates along the way – backed by The Relay Visibility Guarantee and the 365-Day Done Right Promise. Book your free estimate today.
Written by the team at Sawyer Remodel Enterprise.












