







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction service in Enterprise: cabinet installation and refacing, kitchen layout and design, and quartz or granite countertops for existing KraftMaid boxes. What sets our KraftMaid work apart is fitment discipline. Semi-custom cabinetry lives or dies on door overlay, box depth, finish sheen and hardware drill patterns, and we treat those details as the whole job, not an afterthought.

We are an independent KraftMaid service provider. Sawyer Remodel Enterprise is not affiliated with, authorized by, or sponsored by KraftMaid, so every recommendation we make is about your cabinets, not a factory badge. We work across Enterprise’s newer tract homes and the custom builds in Southern Highlands, where KraftMaid lines like Vantage, Deluxe and Prelude are common in kitchens finished in maple, oak and painted finishes.
Call (844) 797-5994 and we’ll put a written price in your hands before any work starts.
Why Trust Sawyer Remodel Enterprise for Your KraftMaid Construction?

Our technicians have up to 21 years of experience, and a good share of that has been spent hanging, adjusting and refacing KraftMaid systems specifically. They know the difference between a Vantage box and a Deluxe box without measuring twice, know which glide systems KraftMaid has used across its lines, and know where the drill patterns land on a standard shaker door versus a painted slab.
That familiarity matters for parts. When a glide or hinge is still supported, we source genuine KraftMaid hardware so the replacement matches what came out. When a component has been discontinued, we fit a quality aftermarket part that meets the same load rating and soft-close spec rather than forcing a mismatched OEM piece. That’s an honest OEM-versus-aftermarket call, made per cabinet.
Warranty-safe practice is part of the job. We don’t cut into a KraftMaid frame or drill new hinge locations without a reason, because that’s exactly the kind of modification that can void coverage on the cabinetry itself. Every project runs under The Relay Visibility Guarantee: a live arrival time, photo updates before and after, and a written price before a tool is picked up. Background-checked, uniformed technicians handle the work, and a live person answers the phone 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Enterprise
These are the issues we see most in KraftMaid kitchens around Enterprise, and why they happen:
- Sagging or squealing drawer slides. KraftMaid’s standard undermount glide systems take a beating when drawers are loaded with cast-iron cookware and stacked canned goods. After years of that weight, the glide wears, the drawer drops a fraction and starts to drag or squeal on the runner. It’s a hardware failure, not a box failure, and it’s fixable without touching the cabinet.
- Soft-close hinges drifting out of adjustment. Painted slab and shaker doors stop sitting flush as the hinge loses its adjustment, so they rub along the stile edges and the gaps open up. Desert temperature swings accelerate the drift, and a door that rubs for a season will wear through the finish at the contact point.
- Chipping and crazing at door corners and pulls. Painted and glazed KraftMaid finishes take a beating in dry air. The finish shrinks and stresses at the corners and around the pull holes, then chips. Enterprise’s low humidity makes this worse than in coastal markets, and it’s most visible on painted finishes in sun-facing kitchen walls.
- Framework and toe-kick separation, or slight racking. Semi-custom boxes set against an out-of-square Nevada wall without proper shimming will rack over time. You’ll see a gap open at the toe-kick or a run of cabinets that no longer sits plumb. It’s a shimming problem from the original install, and it shows up years later.
- Door misalignment after a countertop or floor change. When a countertop gets swapped or a floor gets replaced, the cabinet run can shift slightly and the fronts no longer line up. It’s a reset job, not a replacement job, and it’s common in Enterprise’s newer homes where a first remodel starts around the ten-year mark.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t stock KraftMaid parts locally. Every component is sourced per job once we’ve diagnosed what failed, which keeps us honest about what’s actually available for your specific line and finish. Where the OEM part is still supported, we use genuine KraftMaid hardware and matching finish touch-up. Where it’s been discontinued, we fit a quality aftermarket glide or hinge that meets the same spec.
The repair-or-replace call is straightforward. If the boxes are structurally sound and only the hardware or finish is tired, we repair. Semi-custom cabinetry is built to be repaired cabinet by cabinet, and that’s the cheaper, faster path. If the boxes are water-damaged or the layout is functionally dead, we’ll tell you targeted replacement beats endless patching, even when a repair would be the easier sale for us.
A KraftMaid kitchen that’s a decade old often starts with drawers that no longer close flush and doors that rub at the corners, usually because standard glides have worn and soft-close hinges have lost their adjustment. A qualified local pro pulls each door and drawer to check the box and frame, replaces tired hardware with matching or compatible parts, re-shims any racked cabinet against the wall, and only then resets reveals and re-hangs fronts. Where the frames are sound but the finish or layout is dated, refacing or a partial reconfiguration is often the cheaper path than tearing out usable semi-custom boxes.
Call (844) 797-5994 for a free estimate on your KraftMaid repair or reface.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We pull every door and drawer on the affected run, check the box and frame for racking or water damage, test each glide and hinge, and note the finish condition at corners and pull holes. You get a written assessment, not a verbal guess.
- 2
Repair or install. Hardware gets replaced with genuine KraftMaid or a spec-matched aftermarket part. Racked cabinets get re-shimmed against the wall. New KraftMaid boxes or refacing panels get set to the same reveal line as the existing run, so the kitchen reads as one installation.
- 3
Test. Every door and drawer gets cycled open and closed, soft-close action checked, reveals measured, and finish touch-up applied where needed. We don’t call a job done until the fronts sit flush on their own.
- 4
Warranty. Every project carries the 365-Day Done Right Promise: if it’s not done right within a full year of close, we make it right, backed in writing. A free second visit covers any repair that fails.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Enterprise

We work across the KraftMaid lines most common in Enterprise homes: the Vantage series, the Deluxe series and the Prelude series, in maple, oak and painted finishes. That covers full cabinet installation, refacing of existing boxes, kitchen design and layout, and quartz or granite countertop installation over KraftMaid bases. We also handle backsplash installation and kitchen island installation where a KraftMaid run needs to be extended or reconfigured.
Because KraftMaid is semi-custom, the door overlay, box depth and finish sheen all vary by line. Matching a new cabinet to an existing run means matching those specs exactly, and that’s the detail we spend the most time on.
We Also Service These Brands
KraftMaid is one part of what we handle. Sawyer Remodel Enterprise also works with Kohler and Toto fixtures, and Cambria and Silestone countertops, so a kitchen or bath project doesn’t stall because one brand needs to be coordinated with another. That multi-brand range is why homeowners in Enterprise can get a full remodel priced in one written estimate instead of chasing three separate trades.
FAQs – KraftMaid Construction Service in Enterprise
No. Sawyer Remodel Enterprise is an independent KraftMaid service provider and is not affiliated with, authorized by, or sponsored by KraftMaid. We work on KraftMaid cabinetry as an independent local shop, and our value is in fitment and layout discipline rather than any manufacturer badge. Call (844) 797-5994 for a free estimate.
Yes, whenever the part is still supported. Where a glide or hinge has been discontinued, we fit a quality aftermarket component that meets the same load rating and soft-close spec, and we tell you which is which before the work starts. Call (844) 797-5994 to talk through parts for your specific line.
Hardware and adjustment work on a standard KraftMaid run is typically a short job, often finished in a day; refacing and new cabinet installation run longer and depend on the number of boxes and finish availability. You get a written timeline with your written price before work starts. Call (844) 797-5994 for an exact estimate.
We cover the Vantage, Deluxe and Prelude series, in maple, oak and painted finishes, across installation, refacing, layout and countertop work. If you’re not sure which line you have, the door style and box construction will tell us. Call (844) 797-5994 and we’ll confirm before scheduling.
Not if the work is done correctly. We avoid cutting into a KraftMaid frame or drilling new hinge locations without cause, because that’s the kind of modification that can void coverage on the cabinetry itself. Hardware swaps and re-shimming done to spec keep your warranty intact. Call (844) 797-5994 with questions about your specific coverage.
Here are the ranges we quote in Enterprise, and they’re the numbers you’ll see on the written estimate:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Your exact number depends on the number of boxes, the finish and the countertop material. Call (844) 797-5994 for an exact quote – estimates are free.
Usually, yes, if the boxes are structurally sound. Refacing keeps the semi-custom frame you already paid for and replaces the doors, drawer fronts and finish, which is often the cheaper path than tearing out usable boxes. Call (844) 797-5994 for a free assessment.
Worn standard glides and soft-close hinges that have lost their adjustment are the usual cause, not a box failure. Heavy cookware load and desert temperature swings accelerate the drift. Replacing the hardware and resetting the reveals fixes it. Call (844) 797-5994 to schedule a diagnosis.
Painted and glazed finishes chip and craze at door corners and around pulls faster in dry air, because the finish shrinks and stresses at those points. It’s cosmetic and fixable with matching touch-up and hardware work. Call (844) 797-5994 if your finish needs attention.
Often, yes. Semi-custom boxes are built to be repaired and reconfigured cabinet by cabinet, so a layout that works functionally is usually worth keeping. We’ll tell you honestly when a partial reconfiguration beats a full tear-out. Call (844) 797-5994 for a free estimate.
No. Independent local shops handle KraftMaid repair, refacing and installation every day, and the work quality depends on the shop’s fitment discipline, not a factory badge. Sawyer Remodel Enterprise is independent and not authorized by KraftMaid. Call (844) 797-5994 for a written estimate.
Book Your KraftMaid Service in Enterprise, NV
Whether your KraftMaid drawers have stopped closing flush or you’re ready to reface a dated run, we’ll put a written price in your hands before any work starts. Call (844) 797-5994 to schedule your free estimate in Enterprise. Every project runs under The Relay Visibility Guarantee and the 365-Day Done Right Promise.
Written by the team at Sawyer Remodel Enterprise.












