







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Cost in Enterprise, NV: What You’ll Actually Pay in 2026
A walk-in shower in an Enterprise tract home runs $9,000 to $28,000, and the tile you pick is rarely the number that moves the estimate. Three variables drive the real price: whether we’re swapping a surround on the existing footprint, doing a full demo down to the slab, or changing the layout entirely. Because most Enterprise homes sit on slab with 1990s-to-2000s builder-grade fiberglass, slab prep and waterproofing come first in every quote we write. Call (844) 797-5994 for a free estimate with the number in writing before any work starts.

Why Slab Prep Is Line Item #1 in Enterprise
National shower-cost articles assume a wood subfloor, a basement, or a second-story bath. Enterprise doesn’t work that way. The housing stock here is overwhelmingly Mediterranean and Southwestern stucco-and-tile tract homes built from the late 1990s through the 2020s, poured on grade. When we pull a builder-grade fiberglass pan, we don’t find a clean, flat surface waiting underneath. We find a shallow mortar bed that’s cracked, uneven, or drained slightly wrong, and the drain line set in concrete that has to be re-sloped before a single tile goes down.
That slab work has to happen before waterproofing, and waterproofing is where the Mojave climate changes the spec. Concrete in Southern Nevada expands and contracts hard between winter nights and 110°F summer afternoons. A standard builder-grade pan liner wasn’t installed with that thermal movement in mind. A bonded waterproofing membrane rated for it is the correct spec here, and it costs more than what the original builder used. Skipping it is the single biggest reason we see shower failures in Enterprise homes three or four years after a cheap install.
If you’re weighing a shower-only project against a full bath gut, our Bathroom Remodeling page covers how the pieces fit together.
Walk-In Shower Cost by Scope Tier in Enterprise
Here’s where the money actually lands. The three tiers below cover most Enterprise projects, and the gap between them is mostly labor and prep, not fixtures.
| Scope Tier | What’s Included | Cost Range |
|---|---|---|
| Liner/surround swap on existing footprint | New pan and wall surround over the existing slab, no plumbing relocation | $6,000-$9,000 |
| Full demo with slab mud-bed re-slope | Tear-out to concrete, drain re-slope, new waterproofing membrane, tile | $9,000-$13,000 |
| Layout change (drain move, bench, niche) | Relocated drain, built-in bench, niche, Kohler or Grohe fixtures, Caesarstone or tile surround | $13,000-$18,000+ |
Those numbers track our broader Bathroom Remodeling in Enterprise pricing, and they’re the same ranges you’ll see on our walk-in shower installation guide. A straightforward shower replacement with no layout change stays closer to the lower end. A tub-to-shower conversion usually lands in the middle tier.

Where the Fixture Money Goes (and Why It Matters)
Thermostatic valves from Kohler or Grohe add $400-$900 to the materials side. That’s a real number, and we won’t pretend it’s free. But in a single-story Enterprise tract home on shared supply lines, a standard pressure-balance valve can scald when someone flushes a toilet in the next room. A thermostatic valve holds the temperature steady. For households with kids or older family members, it’s the upgrade we recommend before the tile.
- Base pan and drain: the part nobody sees and the part that fails first if it’s done cheap
- Waterproofing membrane: rated for slab thermal movement, not builder-grade liner
- Tile and surround: ceramic, porcelain, or a Caesarstone slab surround for a curbless look
- Valve and trim: Kohler or Grohe thermostatic setup, or standard pressure-balance
- Glass and door: framed or frameless, tempered, sized to the opening
- Permit: Clark County requirement when plumbing relocates
The Clark County Permit Line Item
Relocate a drain or move a valve behind the wall and Clark County requires a permit for the plumbing work. Generic cost articles leave permits out or bury them, then the homeowner gets a surprise invoice line later. We put permit cost in the written price as a named line before work starts, so the number on the invoice is the number you approved. That’s the whole point of upfront pricing.
Enterprise is also one of the fastest-growing master-planned communities in Southern Nevada, with subdivisions still building out alongside finished homes. That means permit offices and inspection schedules around Mountain’s Edge and the 215 corridor can be busier than in older parts of the valley. We schedule around that reality instead of promising a date and missing it.
What the 365-Day Done Right Promise Covers
Waterproofing and grout are where a shower either lasts or fails. If a seam lets go in year one, we come back and make it right, backed in writing. That’s the 365-Day Done Right Promise, and it’s on every job, not an upgrade you ask for. As part of the Relay Home Co. family, Sawyer Remodel Enterprise runs every project under the Relay Visibility Guarantee: a written price before any work starts, a live arrival time, and before-and-after photo updates. The technicians on your job are background-checked and uniformed, and our technicians have up to 21 years of experience. A live person answers the phone around the clock.
Frequently Asked Questions
A walk-in shower in Enterprise typically costs between $9,000 and $28,000, with most full demo-and-rebuild projects landing between $9,000 and $13,000. The final number depends on slab prep, whether plumbing relocates, and fixture grade. Call (844) 797-5994 for an exact written quote; estimates are free.
Repair is almost always cheaper in the short term and more expensive over five years if the pan or membrane is already compromised. A $600 patch on cracked grout can hide a failing liner for a while, but in Enterprise’s slab-on-grade housing stock, that usually leads to a full redo anyway. If the pan is solid and only the surround is tired, the $6,000-$9,000 swap tier is the honest call. Call us and we’ll tell you which side you’re on before you spend a dollar.
Yes, if the project relocates plumbing, adds a drain, or changes the wall rough-in. Cosmetic swaps over an existing pan typically don’t trigger a permit. We include permit cost as a named line item in the written price, so you’re never surprised at the invoice. Call (844) 797-5994 to walk through your specific project.
Yes, we schedule free estimates quickly, and a written price is in your hands before any work starts. We give you a live arrival time, not a four-hour window, so your day isn’t wasted. Call (844) 797-5994 to book yours.
Get the Number in Writing Before You Commit
Walk-in shower pricing in Enterprise is driven by slab prep, thermal-rated waterproofing, and whether the layout changes, not by the tile swatch. We’ll walk your bathroom, put the range in writing with permit cost named, and stand behind the waterproofing work for a full year. Call (844) 797-5994 for a free estimate. A live person picks up around the clock.
Written by the team at Sawyer Remodel Enterprise, serving Enterprise, NV.
What Our Customers Say
"Floors and paint finished on time. Floors were sanded, stained, and the walls painted without any gaps in the schedule."
- Ron T."Home renovation with a new layout. Permits and inspections were all tracked online."
- Nolan R."Quote was itemized and every change was approved in the app."
- Sasha L.












